Hey,
i need an email triggered after a inspection lot is created by delivery or by production to quality end user for making UD for the respective lot & an email after the UD has been done by quality end user to user who created the lot.
Please guide me through this secenario.
Regards
Abhijit
Hi All,
Is it possible to exclude one storage location from recurring inspection? As i have already referred the below post for the same.
If it's not possible in standard then, Is there any other user exit or enhancement to meet this requirement? Any other possible work around to achieve the same? Please share your suggestion.
Thanks
1) How to check Inspection control status in QI for bulk list of material code at a time,.?
2) How to check Certificate required status e.g. YQ01 for bulk list of material code at a time from MM ?
Hi All,
This is regarding our inspection lot not displayed in QA32/QA33 transaction. Inspection lots has been created in year 2014 for inspection type 01.
UD has been taken & material has been moved to Unrestricted area. But after some time we found that some inspection lots are not displayed in the system.(i.e. QA32/QA33/QA02/QA03/QA13 etc)
In material document i.e. /MIGO transaction, in "Quantity" Tab, "Insp. Lot" tab is displayed but If I click on that tab system is giving message "Inspection lot is not yet assigned"
Same error is getting if I try to find the lot from Batch number or from any other QM inspection lot transaction.
What could be the reason that these inspection lots has been deleted from the system & how to retrieve/find it?
Waiting for your valuable reply.
Thanks
Hi,
In FMEA the Risk Priority Number(RPN) is calculated by using folowing formula
RPN = Severity of the Effect X Probability of Occurence of the cause X Probability of the Detection
490 = 7 X 7 X 10
Now the problem is Probability of detection value is taking default as 10 even thought the valuation proposal is 8.where as Effect(7) and cause(7)values are taking from valuation which are correct .
Please anyone can guide me how to prevent default value considaration of detection.
Regards,
Raj
Hi Gurus
My client wants to default SLED date at the time of GR for the raw materials as they are not sure of the SLED from the vendor ( they are sending different COA for the same lot) and change the SLED subsequently.
What will be the impact if we default a date like 12/31/2999.
Thanks,
SS
Hi,
We create a material document w.r.t. PO against mvt. type 103 (thru MIGO tcode).
Now we are processing MIGO for mvt. type 105 w.r.t. 103 material document...system showing an information
Message no. MIGO067
Please guide.
Dear All,
I had activated inspection type JP08 (copy of 08). but when I posted stock from one storage location to other no lot were generated. I have checked following in SPRO - Maintain Inspection Types, Maintain Inspection Lot Origins and Assign Inspection Types setting and found it to be ok. Can any suggest where I may have mis-stepped.
Regards,
Mukesh
Dear guru,
Presently there is one new requirement from our business wanting us to create an inspection type that will allow for users to use movement type 321 & 322 through MIGO.
Because the standard SAP setup (i.e. SPRO QM Quality Inspection Inspection Lot Creation Inspection for Goods Movement) for movement type 321 and 322 are not tied to any inspection lot origin, further, if I will to use u201Dcopy..asu201D method or hit create New method, the inspection lot origin field box is grey out and not allow input of inspection lot origin.
May I know how to resolve this issue? Or 321 and 322 should not involve QM? or other?
Thanks.
Tuff
hi all,
can anyone tell me where can i find the "step-by-step procedures" for implementing QM module in a production industry...?
Dear All,
I am new to sap qm and please forword qm interview questions and answers
points assured....
Thanks and regards
gajanan
Hi guys,
I am trying to test a security role for my Quality Notification and trying to release the task for items.
The current Task Status: TSOS and User Status: INIT. When I try to release the task the system gives error "Status not allowed"
Description of the problem:
Message no: IM260
Diagnosis:
This refers to an error in central status management
Procedure:
Please refer to your system administrator
When I try to release the task in Development client it works fine, the issues only arises for the role testing.
I checked all my configuration looks fine. The basis guy says the issue might be with configuration and the SU53 results are bogus.
Any help in resolving the issue will help me greatly.
Further, I also checked other similar post in the community but it did not help me solve the issue.
Attached few screen shots
Thanks,
Sai
Dear SAP QM Experts,
I want to set a certain specific screen settings across all the end-users who have authorization for QA16. Screen shot attached for your reference.
Regards,
Ninad.
Dear Gurus,
We are trying to reverse a purchase order.for which MIGO has be done.
let me explain in detail.
In our case material was purchased and migo was done then material went into quality lot and was then posted into unrestricted but the posting was done wrongly so now its has to be revsered.
I followed the following procedure
1)First step:Maintained 08 inspection type in Material Master
2)2nd Step:Reversed the stock from unrestricted to Quality via movement type 322.
3)3rd Step: I tried to reverse the Purchase order via T.code MB01 and movement type 102,Now got above error.
can do the reversal through MBST t.code
Please let me know if the above procedure done me right and where i am going wrong.
Thanks in advance
Regards
Ram
Hi All,
Do someone know (and how), if its possible to split an inspection lot.
We don't know at GR if we are going to need 2 inspection lot, 3 or 1. So we would like to generate 1 at the moment of GR and the split it.
Example:
Purchase Order 100 un. GR 100 un >> Create Inspection lot for 50 un (Inspect. Lot 1000100). WITHOUT doing any UD, we will like to split that 1000100 inspection lot, into 3 different once (Example: Inspection lot 1000101 - Qty. 20, 1000102 - Qty. 20 and 1000103 Qty. 10 ).
Thanks a lot,
Dear all,
I have gone through the sdn site related to this topic. but didnt get any useful input.
We have material stock with batches. how i can get Inspection lot automatically after every 15 days, but i dont want to distrub current setting use for material.
Setting which i did is - Material Master - Inspection type 09
Inspection Plan - Assign
Batch creation date is 26.06.2013. When run QA07, system is giving --No batches have been found for processing
Message no. QV509
Kindly Guide, how to map this...
Regards,
Babar
Hi all,
I'm actually working on inspection lot for production Order (inprocess). I'm only interessed by the computation of the dynamic sample size for the production order: For example If the material is controlled 5 times without problem, he goes to reduced inspection ... .
Thanks to your forum and tutorial like this one , i have already understand lot of things. Howerver, i found nothing for a sample procedure with dynamic modification rule.
To rich my goal i have to :
-MM02: quality management , assign inspection type Y03
-QS21 : create a Master Inspection Characteristic (in my case a qualitative: Accepted/rejected)
-QDV: Create a sampling procedure. As i want my sampling procedure to be dynamic , i have to link it with a sampling scheme (QDP1) and a dynamic modification rule (QDR1).
-CA02: modify the routin of the material. modify control key of operation "inspection" to YP04 and assign my MIC and my sampling procedure to this operation.
-coois: release my production order. Insp. lot create automaticly.
-QA32: Save the result in usage decision. ( i dont want to create Quality Notification even if there is a non conformity), so i record nothing in "Results".
My question is very simple : Will it work ?
Is it possible to have dynamic rule for production order? Do i need a inspection plan ?
Thank you very much to help me for my first topic on this forum 
I will be very happy to share a tutorial when ill do it concretely.
Marwan
Hi Team
I am getting error message when trying to add item into outline agreement in SAP.
Define QM procurement key (material XXXX.)
Message no. QB114
Br, Kiran U
Hi
Inspection type 04 is active for xxx. But when I am doing GR for production order or process order either through MB31 or COR6N I am getting above error " Change the inspection stock of material xxx in QM only". Diagnosis
You want to make a stock posting to/from the inspection stock. This is not allowed for material xxx because the quality inspection control has been activated by QM.
So no GR is possible.
WHat can be the problem and how to resolve it.
Pls note that 101 movement type is active for quality inspection.
Regds
Dear Gurus,
We are trying to reverse a purchase order.for which MIGO has be done.
let me explain in detail.
In our case material was purchased and migo was done then material went into quality lot and was then posted into unrestricted but the posting was done wrongly so now its has to be revsered.
I followed the following procedure
1)First step:Maintained 08 inspection type in Material Master
2)2nd Step:Reversed the stock from unrestricted to Quality via movement type 322.
3)3rd Step: I tried to reverse the Purchase order via T.code MB01 and movement type 102,Now got above error.
can do the reversal through MBST t.code
Please let me know if the above procedure done me right and where i am going wrong.
Thanks in advance
Regards
Ram