hi all,
can anyone tell me where can i find the "step-by-step procedures" for implementing QM module in a production industry...?
↧
QM configuration
↧
QM inspection for movement 321 and 322
Dear guru,
Presently there is one new requirement from our business wanting us to create an inspection type that will allow for users to use movement type 321 & 322 through MIGO.
Because the standard SAP setup (i.e. SPRO QM Quality Inspection Inspection Lot Creation Inspection for Goods Movement) for movement type 321 and 322 are not tied to any inspection lot origin, further, if I will to use u201Dcopy..asu201D method or hit create New method, the inspection lot origin field box is grey out and not allow input of inspection lot origin.
May I know how to resolve this issue? Or 321 and 322 should not involve QM? or other?
Thanks.
Tuff
↧
↧
Inspection lot status
Hi All,
I have a issue in Inspection lot status.
I see for those inspection lots which are cancelled it has status for I0203(SPRQ) as X which is inactive in table TJ02T. Rest other status are active.
Is that due to the reason that lot cancelled? because i don't see I0203 inactive for active lots.
Can anyone please clarify me when the system status of the inspection lots are updated as inactive in the respective table-TJ02T?
Regards,
MBN
↧
Serial Number issue
Hello,
I have never worked in the module QM before. Today a client had an issue (post-upgrade) about the serial number not being displayed in stock movement.
More details:
Transaction QA32, I put my material number and execute
I select the required line and click Usage Decision
Previously, the stock location was MMMK.
I now change it to MMAT and put 1 in the field to be posted (to unrestricted use)
I put A0 for the UD code and save.
Now I check the stock overview in the transaction MMBE:
Select the line MMAT and choose Material Movements
I double-click on the required line to display the material document
The problem is here. In the tab Serial Numbers, the Serial Number is empty.
In the previous system (before upgrade), it was like that:
I'm having trouble to find where is the link between the Serial Number and Stock Movement.
I hope I am clear enough for some of you to understand. Don't hesitate to ask questions if you have.
Grateful if someone could shed some light on this issue so that I know towards what direction I should continue my analysis.
Thank you
↧
OCX Graphics - Control Charts
I have encountered a problem with changing control chart (OCX) graphics. I right click on the area, make my changes, but it will not save. Is there a parameter that needs to be set/reset for me to change these graphics?
JimS
↧
↧
Notification stuck - close open signature process QM02
Hi all,
I am facing a problem with a notification which cannot be processed further. Opening the notification in QM02 brings a popup "Continue signature process for operation" (help on this: "you must close the open signature process for the business operation before you can further process the notification")
When continuing, another message is displayed. "The document to sign was changed since the last signature".
So if I understand this correctly I would need to start the signature process again because the notification has been changed. But I do not know how to do that. I cannot process this notification at all, all functions eg.In Process again, Give Approval etc. are not available, I can only display the notification.
Any ideas how to solve this issue?
Thanks for your help,
Tim
↧
Assign more than one material to Quality notification?
Is it possible to assign more than one material as "reference material" in the Quality notification?
↧
QA495 Error message during Good Receipt
Dear Gurus,
we would like to perform a good receipt with a custom movement (ZD1 as copy of 101) in order to do not activate QM inspection in certain cases. In OMJJ we flagged ZD1 as u201CQM not activeu201D but, since in the material master an Inspection type (with Lot Origin 01) is set, the following error during good receipt (MIGO) occur:
"Change the inspection stock of material RAP4829AA_AG in QM only
Error message QA495"
The problem can be that, in the material document that we are trying to save, the stock type is automatically set to u201C2 - Quality Inspectionu201D. If we change it manually, leaving it blank (unrestricted use), the good receipt is correctly performed, otherwise the QA495 error message appear.
The questions are:
Is not enough deactivate u201CQM activeu201D flag in OMJJ for a specific movement type?
Otherwise, how can we drive stock type (in MIGO) by the movement type?
Thanks a lot,
Regards
Ale
↧
End 2 end Implementation
Dear Experts,
I want to know steps involved and road map with one live example(Documents)
for end to end implementation or roll out project,
please help me regarding this.
Regards,
Nagnath gore.
↧
↧
(Inspection Lot) Dynamic Modification Rule for Production Order
Hi all,
I'm actually working on inspection lot for production Order (inprocess). I'm only interessed by the computation of the dynamic sample size for the production order: For example If the material is controlled 5 times without problem, he goes to reduced inspection ... .
Thanks to your forum and tutorial like this one , i have already understand lot of things. Howerver, i found nothing for a sample procedure with dynamic modification rule.
To rich my goal i have to :
-MM02: quality management , assign inspection type Y03
-QS21 : create a Master Inspection Characteristic (in my case a qualitative: Accepted/rejected)
-QDV: Create a sampling procedure. As i want my sampling procedure to be dynamic , i have to link it with a sampling scheme (QDP1) and a dynamic modification rule (QDR1).
-CA02: modify the routin of the material. modify control key of operation "inspection" to YP04 and assign my MIC and my sampling procedure to this operation.
-coois: release my production order. Insp. lot create automaticly.
-QA32: Save the result in usage decision. ( i dont want to create Quality Notification even if there is a non conformity), so i record nothing in "Results".
My question is very simple : Will it work ?
Is it possible to have dynamic rule for production order? Do i need a inspection plan ?
Thank you very much to help me for my first topic on this forum 
I will be very happy to share a tutorial when ill do it concretely.
Marwan
↧
No insp.Lot for 344 mvt.Type - 08 insp.type
Dear Gurus,
I am facing a small problem while practicing - 08 insp.type for 344 mvt.in IDES
Master Data Maintained:
a.Material-ROH
b.Insp.type-01&08 active and 'Post to Insp.stock' field tick for 2 insp.types.
c.Material extended to 0001,0002 sloc's.
Execution:
a.Created P.O,GR in 0001 sloc for 01 insp.;Insp.lot created
b.UD given as Accepted; posted qty in 'UR' in 0001 SLOC.
c.Carried out stock transfer from 0001 sloc -U/R stock to 0002 Blocked stock thru MB1B.(stock posted to 0002 sloc 'blocked stck' without fail)
Problem:
a. Why?After posting thru MB1B ,no inspection lot created for stock transfer B/w SLOC 0001 & 0002.
Task done:
Verified "Up date control" for mvt type and
Deactivate mvt type for QI -- No mvt type 344 present in the list of mvts.
Plz guide me the solution.
Thanks,
Karthik
↧
Skip Lot using DMR
Hi,
My client has a requirement like there will be a material with "n" number of batches. There may be 30 characteristics attached to the material at plan. Now they want to skip the characteristics or vary the characteristics during inspection. I understand DMR is the option, applying which this can be done. But I am unable to understand that how to apply DMR to get the desired result.
For example Material M has following batches with varying MIC's:
1. MB1 (a q w e r t y---> characteristics or MIC's)
2. MB2 (a q w )
3. MB3 (q w e)
4. MB4 (a q w e r)
5. MB5 (e r t y)
6. MB6 (w e r t)
7. MB7 (a q w e r t)
Mentioned above is the scenario how they want QA Plan to be configured. Going through DMR I didn't understood what do we mean by stage. What is No. of inspections & new inspection stages in "OK" & "NOT OK".
Kindly help.
Thanks,
Rahul
↧
QA 32 GRIN Report - reg.
Am from automotive industry , where we used to get Layout Inspection Report(i.e., Full inspection report by the supplier including Dimensional char., metallurgical inspection, and many more reports). now i would like to flickering the due date in any of the field for sending the report in QA32 transaction report. so that while seeing the GRIN report (QA32) the Qulaity person may inform his supplier to send the details as soon as possible.
↧
↧
How can I export the QM history Result Recording have been entered
Hi ,dear experts,,
After QE51n & QA32 ,entering the QM single result recording and UD. I want to export all the QM history Result recording data .
How can I do ?
Thank you!
Mishuang Zhao
↧
Change the inspection stock of material in QM only:Message no. QA495
Dear Gurus,
We are trying to reverse a purchase order.for which MIGO has be done.
let me explain in detail.
In our case material was purchased and migo was done then material went into quality lot and was then posted into unrestricted but the posting was done wrongly so now its has to be revsered.
I followed the following procedure
1)First step:Maintained 08 inspection type in Material Master
2)2nd Step:Reversed the stock from unrestricted to Quality via movement type 322.
3)3rd Step: I tried to reverse the Purchase order via T.code MB01 and movement type 102,Now got above error.
can do the reversal through MBST t.code
Please let me know if the above procedure done me right and where i am going wrong.
Thanks in advance
Regards
Ram
↧
Quality notification enhancement
Hi all,
When inspection lot is created, we can change all the fields by using enhancement QPL10001. I want to know that is there a similar enhancement for quality notification?
Regards
Danny
↧
[HELP] - QM cancel usage decision
Hello SAP gurus,
I need dome help with a QM scenario.
How can I cancel a UD and move the stock again to Quality Inspection?
Thanks in advance,
Adelmo
↧
↧
Completion data of notification missing
Dear SCN community,
we have a quality notification, which is already closed (status: NOCO...) but SAP System did not set any completion date for this notification. I can't find any sap note for this case.
Add. information: We don't have any modification or using a user Exit while Setting this Parameter as i know.
did somebody know why this inconsistency can occure? Any ideas for a solution?
Kind regards,
Mert
↧
QM inspection for movement 321 and 322
Dear guru,
Presently there is one new requirement from our business wanting us to create an inspection type that will allow for users to use movement type 321 & 322 through MIGO.
Because the standard SAP setup (i.e. SPRO QM Quality Inspection Inspection Lot Creation Inspection for Goods Movement) for movement type 321 and 322 are not tied to any inspection lot origin, further, if I will to use u201Dcopy..asu201D method or hit create New method, the inspection lot origin field box is grey out and not allow input of inspection lot origin.
May I know how to resolve this issue? Or 321 and 322 should not involve QM? or other?
Thanks.
Tuff
↧
Error in PO due to QM Procurement Key
Hi All,
When i am trying to create a PO from PR,it is giving error message that " Define QM Procurement Key(material) ".
Please let me know how to define QM Procurement Key for the material '1220-34567' and how to resolve this issues.
Thanks in advance.
↧